|
|
Palacky fell out of the ATM or Where the proper name begins and ends from the point of view of capitalization
Smejkalová, Kamila
Capital letters in Czech indicate a proper name. However, distinguishing a proper name from a common one can challenging, as evidenced by the number of capitalization enquiries answered by the Language Consulting Center (LCC) of the Czech Language Institute of the Czech Academy of Sciences (CLI). In addition, the status of a proper name is not immutable. Th e name may go through an appellativization process (uppercase letter changes to lowercase) or proprialization process (lowercase letters become uppercase). Th is text deals with appellativization in connection with the spelling and with legal consequences of this process, as well as with other naming types that appear to be problematic for Czech users in terms of capitalization. Telephone, letter, and e-mail inquiries of the LCC, which are annotated in the electronic Database of Language Enquiries on the CLI website, are used as material.
|
|
| |
|
|
Design of Sub-system of IS for Specific Company
Straka, Nikolas ; Neuwirth, Bernard (referee) ; Luhan, Jan (advisor)
This bachelor thesis solves the design of part of the information system for the selected company. In the first part are theoretically described the starting points of the thesis and the sketched background of the studied issue. The next part is focused on the analysis of the current state of the company and the design of the information system according to the requirements.
|
|
|
Security of Biometric Systems
Lodrová, Dana ; Busch, Christoph (referee) ; Provazník, Ivo (referee) ; Drahanský, Martin (advisor)
Hlavním přínosem této práce jsou dva nové přístupy pro zvýšení bezpečnosti biometrických systémů založených na rozpoznávání podle otisků prstů. První přístup je z oblasti testování živosti a znemožňuje použití různých typů falešných otisků prstů a jiných metod oklamání senzoru v průběhu procesu snímání otisků. Tento patentovaný přístup je založen na změně barvy a šířky papilárních linií vlivem přitlačení prstu na skleněný podklad. Výsledná jednotka pro testování živosti může být integrována do optických senzorů. Druhý přístup je z oblasti standardizace a zvyšuje bezpečnost a interoperabilitu procesů extrakce markantů a porovnání. Pro tyto účely jsem vytvořila metodologii, která stanovuje míry sémantické shody pro extraktory markantů otisků prstů. Markanty nalezené testovanými extraktory jsou porovnávány oproti Ground-Truth markantům získaným pomocí shlukování dat poskytnutých daktyloskopickými experty. Tato navrhovaná metodologie je zahrnuta v navrhovaném dodatku k normě ISO/IEC 29109-2 (Amd. 2 WD4).
|
|
|
Purchase process standardization
Skácel, Jakub ; Kotek, Luboš (referee) ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
This master's thesis is engaged in standardization of relation between costumer and supplier from perspective of purchasing products in the automotive industry. In this thesis are specified requirements at the suppliers of plastic parts. The costumer is Robert Bosch České Budějovice (RBCB). By standardization we understand selection and description of customer’s requirements at supplier.
|
|
|
Process optimalization and 5S implementation in the manufacturing company PressMetal-CZ, Ltd
Tvrdý, Vojtěch ; Neužil, Karel (referee) ; Strejček, Jan (advisor)
Bachelor's project deals with optimisation of industrial process using 5S method in a business unit, which was recently acquired by PressMetal-CZ, s.r.o. The first part of the project is focused on theoretical findings and description of each step of the method. The second part is concerned with the process of implementation of 5S method in the business unit. It consists of description and practical solution to the problem, calculation of costs and savings resulting from introduction of 5S method. Conclusion summarises achieved goals and contributions of this project.
|
|
|
Revision and implementation of the 5S system in the production process of Bosch Rexroth, spol.s.r.o
Weidenhöfer, Jan ; Řiháček, Jan (referee) ; Štroner, Marek (advisor)
This diploma thesis deals with the process of revision and implementation of one of the many tools of lean manufacturing – 5S – in the production environment of the selected industrial enterprise Bosch Rexroth, spol. s r. o. In the introduction, the reader is briefly acquainted with the history and scope of the parent company Bosch and Bosch Rexroth. The following research part is devoted to a theoretical introduction to the current concepts of organization and management of the production process with emphasis on the description of the philosophy of lean manufacturing and its individual tools and components, especially in detail the 5S tool. The main part of the work are chapters dealing with the description of the current situation in the selected industrial enterprise, analysis of deviations from the current 5S standards and the proposal of new 5S standards, including the definition of new control mechanisms. At the end of the work is a technical and economic evaluation of the proposal.
|
|
|
Process optimalization and lean implementation in the manufacturing company ADC Czech Republic s.r.o
Mauer, Jindřich ; Obdržálek, Radim (referee) ; Strejček, Jan (advisor)
This Master's thesis deals with the optimilization of the production process of the firm ADC Czech Republic s.r.o. The first part the tesiis focused on the research study of the issue, which is used in the practical part. The second one is devoted to brief introduction of the company ADD Czech Republic and the introduction of the product, that is engineered on the production line. The next chapter is divided into three parts. The first chapter creates an analysis of actual condition. The second deals with the implementation of the proposial. Finally, the third part is focused on other possible proposals, which have not been properly worked out
|
|
|
Standardization Work of a Foreman
Grulich, Petr ; Lašíková, Radka (referee) ; Videcká, Zdeňka (advisor)
This thesis deals with optimizing processes at Siemens, s.r.o. - electric motors spin-off plant in Mohelnice, leading to slimmed-down manufacturing. It includes an analysis of processes and a proposal to increase the efficiency of foreman's organization of work, standardization and interface definition.
|
|
|
The Optimal Accuracy of Measurement Assurance in Accordance with Metrological Confirmation
Frank, Petr ; Kocman, Karel (referee) ; Nenadál, Jaroslav (referee) ; Hruška, Karel (advisor)
This thesis deals with the evaluation of accuracy of measurement and achieving the required accuracy level. This includes global analysis of the uncertainty evaluation, the calibration interval design and the creation of confirmation system. Basis of this work is in identification of all possible problems, which may occur during evaluation of accuracy and achieving the required accuracy level. The analysis is followed by suggested solutions for identified problems. It means namely the selection of probability distribution in case of uncertainty type A, evaluation of degrees of freedom in case of uncertainty type B, nonlinear correlation of input values, evaluation of coverage factor, the choice of method for calibration interval design and the procedure for meeting all metrological confirmation requirements. The last part of the thesis is practical measurement and result evaluation in the field of surge protection devices. This chapter demonstrates conclusions from the syntactical part.
|
guest ::
